Explore our premium lineup of high-performance electric motorcycles, city scooters, heavy-duty cargo platforms, and micro-mobility solutions engineered for Southeast Asian roads.
As China’s leading manufacturer and exporter of heavy-duty electric two-wheelers, our flagship JE-125L Electric Bike is purpose-built to solve the dual challenges of high heat and intense daily workloads across Southeast Asia, specifically tailored for Thailand’s unique topography and urban traffic demands.
Unlike standard lightweight urban e-bikes, the JE-125L incorporates full motorcycle-grade structural geometry. Built upon a high-tensile Q235B cold-rolled steel backbone frame, it withstands structural stress tests exceeding 250 kg of continuous payload. Combined with an advanced 60V 50Ah Lithium Iron Phosphate (LFP / LiFePO4) battery core and a 2000W brushless DC (BLDC) rear hub motor, the JE-125L establishes the definitive benchmark for commercial and commuter electric mobility.
2000W high-efficiency BLDC motor producing up to 110 N.m of instantaneous torque, delivering top speeds of 80 km/h with high incline climbing capabilities.
60V 50Ah thermal-stable LiFePO4 chemistry with IP67 enclosure, offering up to 120 km true range and over 3,000 deep discharge cycles.
Front and rear dual-piston hydraulic disc brakes combined with EBS (Electronic Braking System) for 40% shorter wet-weather stopping distance.
Potted wire harnesses, sealed controllers, and anti-corrosion chassis coatings designed specifically for humid, rainy coastal environments.
Integrated CAN-BUS communication telemetry, NFC card start, remote GPS tracking, and over-the-air (OTA) ECU diagnostics.
17-inch heavy-duty aluminum alloy rims equipped with tubeless street tires for high directional stability on wet asphalt.
From gridlocked Bangkok avenues to steep island terrain in Phuket and Samui, our electric two-wheeler platforms are custom-engineered for localized operational realities.
Navigating Bangkok’s notorious stop-and-go traffic along Sukhumvit, Rama IV, and Sathorn roads requires agile handling, fast low-end acceleration, and zero thermal degradation during long idling periods under 40°C heat. The JE-125L delivers instant throttle response with its 2000W motor, allowing riders to filter through tight lanes safely while reducing monthly commuting costs by up to 85% compared to conventional gas bikes.
Delivery riders in Thailand cover between 100 km to 160 km per shift. The JE-125L's high-capacity 60V 50Ah LFP battery pack combined with modular battery-swapping station compatibility ensures 24/7 continuous operational uptime. Reinforced rear racks easily accommodate standard 80L delivery boxes, while the IP67 waterproof harness guarantees zero breakdown during sudden tropical monsoon downpours.
Rental operators in Thailand’s coastal tourism hubs require low-maintenance, rust-resistant, and tamper-proof electric two-wheelers. The JE-125L features electrostatic powder-coated alloy chassis elements, salt-spray resistant stainless steel fasteners, and smart IoT fleet management integration. Rental operators can track fleet location, set geofences, and monitor real-time battery status via smartphone or web dashboard.
Northern Thailand features challenging mountain inclines and winding road gradients of 15° to 25°. The JE-125L's vector magnetic field-oriented controller (FOC) automatically matches torque output to elevation load, preventing motor overheating while delivering smooth continuous power uphill and regenerative braking energy recovery on steep descents.
Thailand is rapidly asserting itself as Southeast Asia's electric vehicle manufacturing hub under the government's ambitious "30@30" policy, which targets zero-emission vehicles accounting for 30% of total automotive production by 2030. For Thai importers, corporate fleet buyers, and retail distributors, sourcing high-spec electric two-wheelers from established Chinese OEM manufacturers presents unparalleled commercial advantages.
| Policy & Economic Driver | Regulatory Context | Impact & Advantage for JE-125L Importers |
|---|---|---|
| EV 3.5 Incentive Package | Government cash subsidies ranging from 5,000 THB to 18,000 THB per electric two-wheeler unit. | Lowers initial capital cost for importers and fleet operators, accelerating consumer adoption. |
| Form E ACFTA Duty Exemption | 0% import tariff under the ASEAN-China Free Trade Agreement with qualifying Country of Origin. | Eliminates standard 20%-30% import duties, maximizing gross margins for Thai wholesale distributors. |
| TISI 2879-2560 Standard | Mandatory Thai Industrial Standards Institute safety compliance for EV batteries & electrical safety. | JE-125L LFP packs are pre-certified with UN38.3, MSDS, and CE, streamlining TISI registration. |
| BoI Local Content Directives | Thailand Board of Investment tax holidays for local assembly using knock-down (CKD/SKD) kits. | Our factory supplies fully customizable SKD/CKD supply chains for local assembly in Thailand. |
One of the most critical decisions for electric motorcycle buyers in Southeast Asia is battery chemistry. Ambient temperatures in Thailand frequently exceed 40°C during peak summer months, creating severe thermal stress for lithium-ion batteries.
Standard Ternary Lithium (NMC) batteries begin experiencing accelerated chemical degradation and heightened risk of thermal runaway when operational temperatures pass 55°C. In contrast, Lithium Iron Phosphate (LiFePO4 / LFP) chemistry—utilized across our JE-125L, JE-70L, and JE-100L lineups—offers exceptional thermal decomposition thresholds up to 500°C.
Partnering directly with our manufacturing headquarters grants Thai businesses complete supply chain security, rigorous quality engineering, and unmatched customizability.
Our modern manufacturing facility utilizes robotic chassis welding, automated electro-coating, and computer-controlled dyno testing rigs. Every JE-125L undergoes a 28-point quality check including water deluge testing, brake distance calibration, and high-voltage insulation tests prior to export packing.
We empower Thai dealers and corporate operators to build localized brand equity. We provide customized frame colorways, specialized decal graphic packages, customized digital dashboard firmware, and custom-branded app interfaces for iOS and Android.
To optimize shipping volume and lower import tariffs, we offer Complete Built Unit (CBU), Semi-Knocked Down (SKD), and Complete Knocked Down (CKD) packing formats with steel-frame reinforced export crates designed for ocean freight directly to Laem Chabang or Bangkok Ports.
We supply a mandatory 3% fast-moving spare parts package (controllers, throttles, brake pads, LED lights, BMS units) with every container order, backed by direct factory technician video support and comprehensive service manuals in English and Thai.
Get instant answers regarding duty rates, certification compliance, shipping logistics, and custom engineering options for Thailand.
Under the ASEAN-China Free Trade Area (ACFTA) agreement, our factory issues official Form E Certificates of Origin. This allows registered Thai importing entities to completely eliminate standard customs import tariffs (reducing duty from up to 30% down to 0%), leaving only the local Thai VAT applicable at customs entry points such as Laem Chabang Port.
The JE-125L platform complies with international safety standards including CE, ISO9001, and EN15194. The 60V 50Ah LFP battery core carries UN38.3 transport safety certification and full MSDS documentation, allowing Thai distributors to smoothly complete local TIS 2879-2560 registration with the Thai Industrial Standards Institute.
The JE-125L features a fully potted, IP67-rated brushless hub motor and sealed vector controller housed elevated inside the frame chassis. Critical electrical harness connections use waterproof automotive-grade multi-pin connectors, allowing the bike to traverse standing water depths up to 300 mm safely without short-circuiting.
Yes. Our factory provides standardized Semi-Knocked Down (SKD) and Completely Knocked Down (CKD) export configurations complete with assembly jigs, wiring schematics, and component coding. This enables Thai partners to establish local assembly lines and meet Board of Investment (BoI) requirements for local manufacturing subsidies.
Our standard MOQ for wholesale distributor pricing is one 20-foot container (holding approximately 32 to 38 CBU units or up to 75 SKD units). Standard manufacturing lead time is 20 to 25 business days from deposit confirmation, followed by a fast 7-to-10-day sea transit time from Ningbo/Shanghai ports to Bangkok/Laem Chabang.
Absolutely. We offer a specialized commercial edition of the JE-125L equipped with dual-channel quick-release battery trays and standardized connector plugs designed to interface seamlessly with IoT smart battery swapping cabinets used by Grab, Line Man, and foodpanda fleets across Thailand.
Connect directly with our factory engineering team to request wholesale pricing catalog, detailed CKD/SKD assembly options, Form E duty guidance, or custom OEM samples.
